Bundle - Sealant and Cleaners

Sale price Price $499.00 Regular price

This bundle pack includes both our Neutral PH Cleaner, our Oxygenated Cleaner and our original #JUSTSEALIT Sealant, at a discounted price.

INCLUDES:

_________
 
4L NEUTRAL PH STONE CLEANER: Exclusively formulated for natural stone and concrete substrates, this product can be used for general cleaning of dirt and grime.

DIRECTIONS Add one to two capfuls of this product to 15 Litres of water and apply to the surface. Agitate with broom, mop or floor pads and then rinse thoroughly.

SAFETY When using this product it is important to wear suitable protective clothing, chemical resistant gloves and respiratory devices when spraying.

WARNINGS Always test product in inconspicuous area prior to treating entire surface.

_________

4L OXYGENATED STONE CLEANER: Exclusively formulated for natural stone and concrete substrates to remove organic staining and mould.

DIRECTIONS Add one scoop of this product to 5–10 Litres of hot water and apply to the affected surface. Agitate with broom and leave for 15–30 minutes. If desired result is not achieved, repeat this process or use a stronger blend. Once desired result is achieved and the solution has been rinsed off thoroughly, clean the surface with justsealit Natural PH Balancing Agent. Always test product in inconspicuos area prior to treating entire surface.

SAFETY When using this product it is important to wear suitable protective clothing, chemical resistant gloves and respiratory devices when spraying.

WARNINGS Always test product in inconspicuous area prior to treating entire surface. This product is corrosive and can affect plants.

_________

4L SEALANT FOR NATURAL & MAN-MADE STONE, TILE & CONCRETE: Exclusively formulated incorporating leading German aqueous-based technologies, this unique penetrating sealant provides longer lasting protection from the elements.

In addition to longer lasting finishes, this protective finish provides ease of maintenance, while protecting your investment from staining, weathering, salt and corrosion.

USE The sealing of all natural stone, tile and concrete - suitable for indoor and outdoor use. Exceptional protection for outdoor applications, such as outdoor / pool paving.

DIRECTIONS Product to be used undiluted. Ensure material to be treated is clean and bone dry. Apply two wet on wet coats (applicate sealer left to right then immediately apply sealant in opposite direction) with low pressure sprayer and / or lambswool applicator, ensuring there is no excess or pooling evident. An additional coat may be applied to ensure complete coverage. Apply when surface temperature is between 10-30 degrees Celsius.

COVERAGE 4 Litres covers up to 40m2

STORAGE Keep container tightly sealed in a cool, well ventilated space.
It is recommended this product is used within 7 days after opening.

WARRANTY A 20 year performance warranty is offered when product is applied and maintained regularly as outlined in our warranty document. Just Seal It’s responsibility is strictly limited to replacement of sealer. Apart from those expressed, there are no other warranties or guarantees regarding the performance of this product.

SAFETY When using this product it is important to wear suitable protective clothing, chemical resistant gloves and respiratory devices when spraying. Keep out of reach of children. Avoid contact with eyes and skin. Do not breathe gas, fumes, vapour or spray. Harmful if swallowed.

FIRST AID If swallowed, contact a physician. Do not induce vomiting. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation persists contact a physician. If in eyes, hold open, floor with water for at least 15 minutes and contact a physician. If breathe vapours or mist, relocate to fresh air, if symptoms persist contact a physician.

PRECAUTIONS 1. Not to be ingested or taken internally 2. Avoid moisture contact with the surface for six hours after any application 3. Protect surrounding areas from overspray 4. Use a positive pressure respirator if ventilation is inadequate 5. During application, wear suitable chemical resistant gloves, clothing,
safety goggles and organic vapour respirator 6. Avoid applying in windy conditions 7. Wash hands thoroughly after applying.

WARNINGS Always test product in inconspicuous area and allow 24 hours to ensure desired results are achieved prior to treating entire surface. This product will not prevent surface etching or wear and may lighten or darken some surfaces. It is the responsibility of the user to determine this product suitability and intended purpose.