RIP Mould & Bacteria Treatment

Formulated for exterior surfaces including natural stone, concrete and more. RIP Mould removes mould, mildew, and most organic contaminants from surfaces.

Add one litre of RIP Mould to 5 litres of water in a watering can or suitable low pressure sprayer.

Step 1: Lightly wet the surface with water. Do not saturate.

Step 2: Apply RIP Mould to the surface, agitate with a soft to medium bristle broom where applicable, and leave for at least 15 minutes. Ensure surface stays wet by applying additional product if required.

Step 3: Rinse the surface or walk away.